Description
Hydranautics CPA3 RO Membrane
PT Profilter Indonesia adalah importir distributor agen dan supplier Hydranautics CPA3 RO Membrane terlengkap sebagai promotor solusi paling efisien dalam menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan kualitas dan harga terbaik
Description Hydranautics CPA RO Membrane
Setting the industry standard for the highest salt rejection rates
Ultrapure water is essential in several industrial applications. CPA3 RO membrane hydranautics are regarded as the industry standard for all critical high purity applications – from pharmaceutical to power industry.
CPA lines of spiral-wound RO membranes are available in a variety of sizes and deliver unmatched performance with the highest salt rejection rates for brackish water applications. High throughput, efficiency and cost-effectiveness make CPA membranes the best high-rejection brackish water RO membranes in the industry.
Because of its exceptionally high salt rejection, CPA membranes are used in power generation, pharmaceutical, electronics and semiconductor industry.
Hydranautics Membrane Brackish Water
CPA3 is the third generation CPA high rejection brackish water RO membrane introduced in the late 1990’s. This membrane at 99.7% rejection is an upgrade to the CPA2 with 10% more membrane area (400 square feet). This resulted in reduced capital costs by requiring fewer pressure vessels and less floor space.
CPA3 membranes also have a thicker (34 mil) feed spacer that exhibits higher tolerance to feed water suspended solids.
CPA3 membrane is available in diameters of 8.0 inches.
Silahkan kunjungi gudang kami untuk memastikan kondisi stock maupun diskusi pemasangan unit baru
Specified Performance
- Permeate Flow: 11,000 gpd (41.6 m3/d)
- Salt Rejection: 99.7% (99.6% minimum)
- Test Conditions: 1500 ppm NaCl solution
- 225 psig (1.55 MPa) Applied Pressure
- 77 oF (25 oC) Operating Temperature
- 15% Permeate Recovery
- 6.5 – 7.0 pH Range
General Product Description
- Configuration: Spiral Wound
- Membrane Polymer: Composite Polyamide
- Membrane Active Area**: 400 ft2 (37.2 m2)
- Feed Spacer: 34 mil (0.86 mm)
Product Use and Restrictions
- Maximum Applied Pressure: 600 psig (4.14 MPa)
- Maximum Chlorine Concentration: < 0.1 ppm
- Maximum Operating Temperature: 113 oF (45 oC)
- pH Range, Continuous (Cleaning): 2-10.8 (1-12.5)
- Maximum Feedwater Turbidity: 1.0 NTU
- Maximum Feedwater SDI (15 mins): 5.0
- Maximum Feed Flow: 85 gpm (19.3 m3/h)
- Minimum Brine Flow: 12 gpm (2.7 m3/h)
- Maximum Pressure Drop for Each Element: 15 psi (0.10 MPa)
Informasi lengkap tentang stock produk dan data sheet serta penawaran harga Hydranautics CPA3 RO Membrane silahkan hubungi CS kantor kami.
Alamat kontak
PT PROFILTER INDONESIA
Ruko Blok G/54 – Gudang A/01
Jl.Canadian Broadway
Kawasan Pergudangan Commpark – Kotawisata – Cibubur
Kantor : +6221 84937329 , 84937805 , 22962668
Mobile : 081385066789
Email : sales@profilterindonesia.com
