Hydranautics ESPA2-LD-4040

Hydranautics ESPA2-LD-4040 PT PROFILTER INDONESIA Hubungi 081385066789 Pastikan produk yang anda dapatkan adalah asli dari PFI Watermaker dengan price harga dan kualitas terbaik


Hydranautics ESPA2-LD-4040

Kami adalah importir distributor agen dan supplier Hydranautics ESPA2-LD-4040 terlengkap menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan kualitas produk dan harga terbaik.


Description Hydranautics ESPA2

ESPA2 membranes provide optimum salt rejection and permeate flows. They are chosen when lower permeate TDS and lower feed pressures are needed. Hydranautics ESPA2 membranes offer highest energy efficiency at lowest costs and are used in large municipal wastewater reclamation plants.

ESPAB are low pressure brackish water membranes having a high rejection for boron.

Hydranautics ESPA2-LD membrane is available in diameters of 4.0 and 8.0 inches.

The ESPA2 membranes are available in the LD variant. Low differential LD Technology® models are offered to minimize colloidal fouling when used with conventional pre-treatment equipment. These membranes offer consistently low feed pressures and longer intervals between cleanings.

ESPA2 and ESPAB membranes Hydranautics Nitto are available in the MAX variant with 440 ft2 (40.9 m2) active membrane surface area. Increased membrane area reduces capital costs by requiring fewer pressure vessels and less floor space.

Innovations have enabled us to offer the Nitto Hydranautics ESPA2-LD MAX membranes which have a membrane area of 440 ft2 (40.9 m2) and use 34 mil feed spacer


Specification Nitto ESPA2-LD-4040

  • Permeate Flow: 2,000 gpd (7.57 m3/d)
  • Salt Rejection: 99.6% (99.4% minimum)
  • Test Conditions: 1500 ppm NaCl solution
    • 150 psig (1.03 MPa) Applied Pressure
    • 77 oF (25 oC) Operating Temperature
    • 15% Permeate Recovery
    • 5 – 7.0 pH Range
  • Configuration: Low Fouling Spiral Wound
  • Membrane Polymer: Composite Polyamide
  • Membrane Active Area**: 80 ft2 (7.43 m2)
  • Feed Spacer: 34 mil (0.86 mm)
  • Maximum Applied Pressure: 600 psig (4.14 MPa)
  • Chlorine Concentration max.: < 0.1 ppm
  • Maximum Operating Temperature max.: 113 F (45 C)
  • pH Range, Continuous (Cleaning): 2-10.6 (1-12)
  • Feedwater Turbidity max.: 1.0 NTU
  • Maximum Feedwater SDI (15 mins): 5.0
  • Feed Flow max.: 16 gpm (3.6 m3/h)
  • Minimum Brine Flow: 3 gpm (0.7 m3/h)
  • Maximum Pressure Drop for Each Element: 15 psi (0.10 MPa)


Combining energy efficiency with high rejection

The energy required to pressurize RO feed water is the largest contributor to the total energy consumption of the RO plant. Nitto ESPA membranes hydranautics are the choice for applications demanding high-energy efficiency, with uncompromised productivity and salt rejection. Operating at significantly lower pressures, ESPA elements produce high quality water in a range of water treatment applications, ensuring energy cost savings.

ESPA membranes Nitto are used in the treatment of drinking water, industrial process waters, municipal and industrial waste water recovery and reuse because of this exception performance capability. These membranes also serve as part of polishing units in seawater desalination plants when boron rejection is critical.


Untuk informasi lebih lanjut tentang produk dan harga Nitto Hydranautics ESPA2-LD-4040 silahkan hubungi kami


Alamat kontak


Ruko Blok G/54 – Gudang A/01

Jl.Canadian Broadway

Kawasan Pergudangan Commpark – Kotawisata – Cibubur

Kantor : +6221 84937329 , 84937805 , 22962668

Mobile : +62 812-9634-0505

Email : sales@profilterindonesia.com


Exclusive products

Special category of products