Description
Hydranautics SWC5 Max RO Membrane
Kami adalah importir distributor agen dan supplier Hydranautics SWC5 Max RO Membrane Seawater terlengkap menyediakan berbagai kebutuhan spare part filter untuk keperluan industri dengan kualitas produk dan harga terbaik
Description Hydranautics SWC5 RO Membrane
SWC5 membranes provide optimum salt rejection and permeate flows. They are chosen when lower permeate TDS and lower feed pressures are needed. SWC5 membranes offer highest energy efficiency at lowest costs and are used in mega desalination plants. SWC5 membranes are available in two different types of variants, LD and MAX Low differential LD Technology® models are offered to minimize colloidal fouling when used with conventional pre-treatment equipment. They offer consistently low feed pressures and highest duration between two successive cleanings.
The MAX models have a 440 ft2 (40.9 m2) active membrane surface area. They provide excellent performance with high TDS and boron removal from warm waters
Specification SWC5 MAX
- Permeate Flow: 9,900 gpd (37.5 m3/d)
- Salt Rejection: 99.8% (99.7% minimum)
- Test Conditions: 32000 ppm NaCl solution
- 800 psig (5.5 MPa) Applied Pressure
- 77 oF (25 oC) Operating Temperature
- 10% Permeate Recovery
- 6.5 – 7.0 pH Range
- Configuration: Spiral Wound
- Membrane Polymer: Composite Polyamide
- Membrane Active Area**: 440 ft2 (40.9 m2)
No One Does Seawater Desalination Better
As the world is facing freshwater scarcity, Hydranautics brings a range of SWC RO membranes to meet the demands of desalination industry. SWC RO membranes have improved the productivity and salt rejection for more than two decades while reducing their environmental impact. SWC membranes come in a range of innovative formulations depending on the level of seawater salinity required.
Hydranautics SWC membranes come in a range of innovative formulations suitable for varying degrees of seawater salinity. Each offers the highest productivity and salt rejection rates in the industry combined with the optimized flow, low fouling and low energy consumption.
This exceptional performance and consistency creates demand for SWC Hydranautics membranes in seawater desalination and high TDS industrial waste water treatment applications, including conventional and hybrid designs.
Untuk informasi lebih lanjut tentang produk dan harga Hydranautics SWC5 Max RO Membrane Nitto Seawater silahkan hubungi kami
Alamat kontak
PT PROFILTER INDONESIA
Ruko Blok G/54 – Gudang A/01
Jl.Canadian Broadway
Kawasan Pergudangan Commpark – Kotawisata – Cibubur
Kantor : +6221 84937329 , 84937805 , 22962668
Mobile : +62 812-9634-0505
Email : sales@profilterindonesia.com
